Gas filters KZGO FG(FS), FG-50S, FG16, etc.

They are intended for installation on gas pipelines in front of shut-off valves of gas-burning devices of boilers, heat generators, infrared heaters and other gas-burning installations in order to purify gas from mechanical particles to increase the reliability and durability of the equipment.

Climatic version: UHL1 (-60...+40 °C) or U3 (-45...+40 °C).

Gas mesh filters FG(FS)-25/32/40/50

Designed for cleaning natural gas, air and other non-aggressive gases from mechanical impurities. The scope of application of filters is installation on gas pipelines in front of measuring instruments, shut—off valves, gas-burning devices of boilers and other gas supply installations to increase the reliability and durability of the equipment.

Gas filters FG-50S (aluminum housing)

Designed for use with gas supply systems for the purification of natural gas according to GOST 5542-87 and other non-aggressive gases and air from mechanical impurities.

The operating conditions of the filters in terms of the impact of climatic factors must comply with the climatic version of UHL2 GOST 15150-69, but with an ambient temperature from minus 40 ° C to plus 60 ° C.

It is also envisaged to complete any filter with a pressure drop indicator, which allows monitoring the degree of contamination of the filter element and its timely replacement or cleaning.

Gas Filters FG16-50, FG16-50-V, FG16-80, FG16-80-V, FG16-100, FG16-100-V

They are designed to purify gas from impurities of solid particles, dust, rust and are installed in front of measuring instruments, shut-off valves, gas burners of boilers and other gas-burning devices.

Table of technical characteristics of gas filters