Gas pressure regulators KZGO RDU, RDSK, RDP, RDNA, RDGD, etc.

Universal gas pressure regulators RDU–32/W

Designed to reduce the pressure of the vapor phase of liquefied gas to low, automatically maintain the output pressure at a given level regardless of changes in flow and inlet pressure, automatically shut off the gas supply when the output pressure increases above the set limit or when the input pressure decreases below a certain value.

Universal gas pressure regulators RDU-32/S

Designed to reduce high and medium pressure to low, automatically maintain the output pressure at a given level regardless of changes in flow and inlet pressure, automatically shut off the gas supply when the output pressure increases or decreases above the set limit.

The operating conditions of the regulator must comply with the climatic version of UHL2 GOST 15150-69 with an ambient temperature from minus 40 to plus 60 ° C.

RDSK-50/400 Gas pressure regulators (RDSK-50/400B, RDSK-50/400M)

Designed to reduce high pressure to medium, automatically maintain the average output pressure at a given level, automatically shut off the gas supply in case of emergency increase and decrease of the output pressure above the permissible set values.

The regulators are manufactured in the climatic version of UHL2 GOST 15150-69 with an ambient temperature from minus 40 to plus 60 ° C.

The regulator is installed on a horizontal section of the gas pipeline in a vertical position.

Direct-flow gas pressure regulator RDP

A pilot-type direct-flow gas pressure regulator for gas distribution networks with a pressure of up to 1.2 MPa.

It is designed to reduce gas pressure and automatically maintain output pressure within specified limits regardless of changes in input pressure and gas flow and is used in gas supply systems for industrial, agricultural and municipal facilities.

The operating conditions of the regulator must comply with the climatic version of UHL-2 GOST 15150-69. The regulator is designed for stable operation when exposed to ambient temperatures from minus 40 ° C to plus 60 ° C and relative humidity up to 95% at a temperature of plus 35 ° C.

• RDP-50 - with conditional passage DN =50;
• RDP-100 - with conditional passage DN = 100.

Combined gas pressure regulators RDNA-50/400, RDNA-50/1000

Designed to reduce high and medium pressure to low, automatically maintain the output pressure at a predetermined level regardless of changes in flow and inlet pressure, automatically shut off the gas supply in case of an emergency increase or decrease in the output pressure above the set values.

The operating conditions of the regulators must comply with the climatic version of UHL2 GOST 15150-69 with an ambient temperature of minus 40 to plus 60 ° C.

Universal gas pressure regulator RDGD-20M

Designed for gas supply systems for domestic and industrial consumers. They provide reduction of high and medium pressure to low, automatic maintenance of the output pressure at a predetermined level, automatic shutdown of the gas supply in case of emergency increase and decrease of the output pressure above the permissible set values.

The regulators are manufactured in the climatic version of UHL2 GOST 15150-69 with an ambient temperature from minus 40 to plus 60 ° C.

Gas pressure regulators RDG

RDG gas pressure regulators with a built-in safety shut-off valve are designed to reduce high or medium pressure, automatically maintain the output pressure at a predetermined level, automatically turn off the gas supply in case of an emergency increase and decrease in the output pressure above the permissible set values.

Regulators are installed in hydraulic fracturing and GRU of gas supply systems for industrial and municipal facilities.

The operating conditions of the regulators must comply with the climatic version of UHL2 GOST 15150-69 with an ambient temperature from minus 40 to plus 60 ° C.

Gas pressure regulators RDBK1

Designed for installation in gas control points (hydraulic fracturing) of gas supply systems of urban and rural settlements, in hydraulic fracturing and gas control installations of GRU industrial and municipal enterprises.

The regulators provide a reduction in the inlet gas pressure, as well as automatic maintenance of the set outlet pressure regardless of changes in gas flow and inlet pressure.

RD-32M Gas Pressure Regulators

Designed to reduce the pressure of non-aggressive gases and automatically maintain the output pressure within specified limits at gas control points (hydraulic fracturing) and gas control units (GRU).

The operating conditions of the regulator must comply with the climatic version of UHL2 GOST 15150-69 with an ambient temperature from minus 40 to plus 60 ° C.

Table of technical characteristics of gas pressure regulators